Updated November 2026
Quick answer: If your laptop says “plugged in, not charging”, first check whether it always stops at the same level, like 60%, 80% or 95%. If it does, a battery-saving setting is on, and your battery is fine. Turn it off in your brand’s app or BIOS (Fix 1). If it won’t charge at all, check the charger, do a hard reset and reinstall the battery driver (Fixes 2 to 4).
Also read: Laptop Won’t Turn On? 10 Fixes That Actually Work
First: Does It Stop at the Same Percentage Every Time?
| What you see | What it usually means | Go to |
|---|---|---|
| Always stops at around 55–60% | Lenovo Conservation Mode or Asus Maximum Lifespan Mode | Fix 1 |
| Always stops at around 80% | Dell, HP, Asus or Acer battery-health limit | Fix 1 |
| Stops at 95–99% | Normal. Many laptops wait before topping up to protect the battery | No fix needed |
| Stuck at the same low number or 0% | Charger, driver or battery problem | Fixes 2 to 9 |
| Charging light is off | Power isn’t reaching the laptop | Fix 2 |
Fix 1: Turn Off the Battery Charge Limit
Most laptops have a setting that stops charging early to make the battery last more years. It’s great if you’re always plugged in, but confusing if you didn’t know it was on.
Lenovo (IdeaPad, Yoga, Legion)
- Open Lenovo Vantage.
- Go to Device > Power (on some versions, Hardware Settings > Power).
- Turn Conservation Mode off.
When it’s on, the battery stops at 55–60%.
Lenovo ThinkPad
- Open Lenovo Vantage > Device > Power.
- Turn off Battery Charge Threshold (custom threshold).
Dell
- Open Dell Optimizer (or Dell Power Manager on older models) and go to the battery settings.
- If it’s set to Primarily AC Use (charges only to about 50–80%) or a low Custom limit, change it to Standard.
You can also change it in the BIOS: restart, tap F2, and look under Power or Battery for Primary Battery Charge Configuration.
HP
- Restart and tap F10 to open the BIOS.
- Find Battery Health Manager (often under Advanced or Power Management).
- If it’s set to Maximize my battery health (stops at about 80%), change it to Let HP manage my battery charging or Maximize my battery duration.
- Save and exit.
Asus
- Open MyASUS.
- Go to Device Settings > Battery Health Charging (called Battery Care Mode on some models).
- Choose Full Capacity Mode to charge to 100%.
Maximum Lifespan Mode stops at 60%, and Balanced Mode stops at 80%.
Acer
Some Acer models have a battery charge limit in Acer Care Center or Acer Quick Access. If yours stops at 80%, look for a Battery charge limit switch and turn it off.
Tip: If you keep your laptop plugged in all day, it’s actually better to leave the limit on. It keeps the battery healthy for longer. Just turn it off before a trip.
Fix 2: Check the Charger, Cable and Port
- Plug the charger into a different wall outlet.
- Check for a bent pin, frayed cable or loose plug.
- Use the original charger, or one with the same wattage (printed on the charger brick).
- Charging over USB-C? Make sure you’re using the USB-C port that supports charging. Not all USB-C ports do. It often has a lightning or power icon next to it.
- Phone chargers and weak USB-C chargers can say “plugged in” but supply too little power to charge.
Fix 3: Do a Hard Reset
This resets the chip that controls charging.
- Shut down the laptop and unplug the charger.
- Hold the power button for 15 to 20 seconds.
- Plug the charger back in and turn the laptop on.
Each brand has its own version (reset pinhole, longer hold, and so on). See our Laptop Won’t Turn On guide for the exact steps for Dell, HP, Lenovo, Asus and Acer.
Fix 4: Reinstall the Battery Driver
A glitchy battery driver is one of the most common causes of “plugged in, not charging” in Windows 11.
- Right-click Start and choose Device Manager.
- Expand Batteries.
- Right-click Microsoft ACPI-Compliant Control Method Battery and choose Uninstall device.
- Click Uninstall.
- Restart your laptop. Windows reinstalls the driver automatically.
Important: Only uninstall the Microsoft ACPI-Compliant Control Method Battery entry. Don’t remove Microsoft AC Adapter or any other entry.
Fix 5: Update the BIOS and Drivers
Charging is controlled partly by the BIOS. Updates often fix charging bugs.
- Dell: SupportAssist
- HP: HP Support Assistant
- Lenovo: Lenovo Vantage > System Update
- Asus: MyASUS > Customer Support > Live Update
- Acer: Acer Care Center, or download from Acer’s support site
- Windows: Settings > Windows Update > Check for updates, then Advanced options > Optional updates
Keep the laptop plugged in during a BIOS update and don’t turn it off.
Fix 6: Reset Your Windows Power Settings
- Click Start, type cmd, right-click Command Prompt and choose Run as administrator.
- Type this and press Enter:
powercfg -restoredefaultschemes
- Restart your laptop.
Fix 7: Let It Cool Down
Many laptops pause charging when the battery is too hot to protect it. This happens a lot when gaming, during video calls or on a bed or couch.
- Use the laptop on a hard, flat surface.
- Close heavy apps and let it cool for 15 to 20 minutes.
- Check whether it starts charging again.
Read related post: Laptop Overheating and Fan Too Loud? 10 Fixes
Fix 8: Check Your Battery Health
Batteries wear out. After a few years, one may not charge properly at all.
- Click Start, type cmd and open Command Prompt.
- Type this and press Enter:
powercfg /batteryreport
- Open the file it creates (the path is shown on screen, usually
C:\Users\YourName\battery-report.html). - Compare Design Capacity with Full Charge Capacity.
If Full Charge Capacity is below about 60–70% of Design Capacity, the battery is badly worn and should be replaced.
Brand battery tests: Dell SupportAssist, HP PC Hardware Diagnostics (press F2 at startup), Lenovo Vantage and MyASUS (System Diagnosis) can all test the battery.
Fix 9: Replace the Charger or Battery
If nothing above works:
- Try another compatible charger first. It’s the cheapest fix.
- Check if your laptop is still under warranty on the brand’s support site (use the serial number on the bottom sticker).
- Have the battery replaced by the manufacturer or a trusted repair shop.
Stop using it right away if the battery is swollen (the case bulges or the touchpad lifts), smells odd or gets very hot. A swollen battery is a fire risk.
Frequently Asked Questions
Why does my laptop say plugged in, not charging?
Most often a battery-saving setting is stopping it at 60% or 80%. Other causes are a weak charger, a glitchy battery driver, heat or a worn-out battery.
Why does my Lenovo laptop stop charging at 60%?
Conservation Mode is on. Turn it off in Lenovo Vantage > Device > Power.
Why does my laptop stop charging at 80%?
A battery-health setting is on: Primarily AC Use on Dell, Maximize my battery health on HP, Balanced Mode on Asus, or a charge limit on Acer. Turn it off to charge to 100%.
Is it bad to keep my laptop plugged in all the time?
Not really, but keeping the battery at 100% all day wears it out faster. That’s why these charge limits exist. If you’re always plugged in, leaving the limit on is the healthiest option.
Will uninstalling the battery driver damage my laptop?
No. Windows reinstalls the Microsoft ACPI-Compliant Control Method Battery driver automatically when you restart.
Why is my laptop charging slowly?
The charger may be too weak, especially over USB-C. Use the original charger and close heavy apps while charging.
How do I know if my laptop battery needs replacing?
Run powercfg /batteryreport. If the Full Charge Capacity is much lower than the Design Capacity, or the laptop dies quickly once unplugged, the battery is worn out.
Related Guides
- Laptop Won’t Turn On? 10 Fixes That Actually Work
- Laptop Black Screen? How to Fix It
- How to Screenshot on Lenovo IdeaPad
- How to Screenshot on HP Pavilion
- How to Screenshot on Asus ZenBook
- Laptop Overheating and Fan Too Loud? 10 Fixes

Arslan Jaffar is the founder of Screenshot Geek. He writes simple, step-by-step guides for phones, laptops, and tablets, covering screenshots on Samsung, iPhone, Pixel, Dell, HP, Lenovo, and Mac, plus troubleshooting fixes, tips and tricks, top 5 lists, and the latest tech news. His goal is to make technology simple, so you can find the right answer in seconds.